Monday, March 28, 2016

VE Voyager paddle, long term comparative test and review.

Our little group are great fans of VE Paddles Explorer sea kayaking paddles, David, Mike, Phil and myself all use them. I now want to feed back on an exciting new development: a high aspect touring blade from VE. The new VE Voyager AirCore is suitable for both high and low angle paddling and is designed to have a very gentle catch.

Due to my ill health and inclement weather this review has been much delayed but the paddle has now covered a total of 350km and been paddled by myself and 5 others on a number of day trips which have varied between F0 to F4. The locations have included the Solway Firth, the Firth of Clyde and the area round the Sound of Arisaig. On most trips, we alternated between the VE Voyager, the VE Explorer small, the Werner Cyprus and a Lettmann Blacklight Greenland paddle for 5km each. On other trips Tony who normally uses a Werner Cyprus used the VE Voyager for a 30km trip, and David used the Voyager on 70km in separate tripos. I covered the remainder of the distance alternating between the VE Voyager, the VE Explorer small and large, the Werner Cyprus and a Lettmann Blacklight GP.

Phil, above, took to the Voyager straight away. Though Phil is a natural high angle paddler, he liked it both for high angle and low angle paddling.

He loved the soft catch, the lack of flutter and the lack of wrist strain even under hard acceleration. He also praised its ability to maintain speed as he disappeared over the horizon. He particularly liked the easy and clean exit. He preferred to VE Voyager to his current favourite paddle the VE Explorer small.

Mike alternates between his Werner Cyprus cranks and his VE Explorer small on a straight shaft. Mike commented about how easy and relaxing it was to use the Voyager in low angle style. He particularly liked the gentle catch. He found it very effective for bow and stern rudder strokes. He only tried the paddle in calm conditions and would like to try it in rougher water and surf before giving up on his Explorer. He also noted a bit of give when pulling on the blade. This was almost certainly due to the glass fibre shaft compared with the carbon shaft in his own VE Explorer. Mike felt he preferred the carbon shaft.

Original VE two piece join, results in halves being different length.

Mike noticed that the split paddle has two different sized halves. This is because the shaft has been cut exactly in the middle so that the leverlock is in the middle when the shaft is at its shortest. (Of course when the shaft is extended, it is offset). He found that the longer half would not fit in his cockpit which has a custom bulkhead, neither would it fit in his Subaru Impreza boot. David also found the longer half would not fit in his BMW E46 3 series boot. This meant we could not put all our gear in the cockpit and get the cockpit cover on when we trolleyed the kayaks onto a ferry or put them onto the roofrack when running a shuttle.

Scottish Lendal join, results in two halves of equal length.

Scottish Lendal used to cut the shaft to one side of the midline and fit the joining spigot to the shorter half. (The Lendal shaft above is not adjustable in length but Lendal adjustable length shafts were also cut like this.) This results in the two halves being as short as possible, which is the whole point of having a two piece. It makes it easier to transport. I fed this back to Stu at VE paddles and he has taken the comments on board. He will now offer a further option to split the two piece shaft asymmetrically to make more equal halves to suit those customers who need their two pieces as short as possible. Well done Stu!

David normally paddles with a VE small blade paddle. He took to the Voyager straight away and particularly liked it for low angle paddling and the gentle catch.

He praised it for how light it felt and how little it stressed his arthritic joints giving an effortless feel to paddling.

He did wonder if it might feel too light in the water and initially like Mike wanted to reserve judgement until he had tried it in rougher water before deciding whether he preferred it to his Explorer.

He did not have long to wait. Just after this photo was taken, the west wind got up and blew straight into the south channel of Loch Moidart out of which the east going spring ebb was running. It got rather too rough to take out my Canon 5D Mk 3 but David tackled the rough stuff with gusto. He preferred the slightly bigger Voyager blade to his Explorer small. He also appreciated the softer glass shaft to his stiffer carbon Explorer shaft.

At the end of David's 70km with the VE Voyager he was extremely reluctant to hand it back. Indeed I had to wrest it back from his grip. He hung on fiercely despite the cold affecting his arthritic hands. (Note the Walker's crisp bag pogies (sea salt and vinegar of course).

When he first tried the VE Voyager, Maurice had had a long hard day's paddle the previous day and his wrists were aching from not having used his Werner Cyprus paddle for some months. (Both Tony and I also find this if we have not used the Cyprus for a while.) Maurice could not believe how light the Voyager felt when pulling in the water compared to his usual Cyprus paddle.

Mike on the left with the Explorer, Maurice on the left with the Voyager at the start of a 37km round of Loch Nevis and Loch Morar.

Maurice also commented how the Voyager had a more gentle catch and less flutter than the Cyprus even when accelerating hard. He was also surprised by the power of the Voyager blades. One unexpected result of this particular day was that both Mike and Maurice tried the GP after trying the Voyager. They had each tried the GP once before after using their Cyprus paddles. In those tests neither of them liked the GP. This time they both appreciated the GP more after having tried the Voyager first! Although Maurice preferred the VE Voyager to his own Werner Cyprus and is looking for a second paddle, he felt the Voyager was too close in style to his Werners and is thinking of buying a GP as a second paddle.

Tony was very surprised about how powerful the Voyager was despite the gentle catch. He could not wait to sprint ahead. He thought it worked very well when pushing on but without causing strain. He, like me, had only paddled once in four months and though his muscles were aching after the 30km crossing to Arran, he did not complain about sore joints, which he had noticed on the same crossing after a similar lay off. On that occasion he used his Werner Cyprus. He found the Voyager paddle to be a bit heavier in the hands than his Cyprus and said he would be keen to test the Voyager with cranks on a carbon shaft.

As far as my own impression is concerned, I echo the comments about clean entry and exit, the gentle catch, the surprising power with lack of flutter and the low strain on my joints when pushing on. Like Phil, I found the Voyager worked equally well in high or low paddling styles and it certainly is no slouch if you are paddling hard with a high angle stroke (which both Phil and Tony favoured when using the Voyager).  Due to the recent weather we have not yet tried paddling when loaded on a camping expedition but the ease of paddling on a day trip bodes well for their use when loaded on longer trips.

With regard to the Voyager shaft on test, it is made of glass fibre rather than the carbon in the Explorer shafts we were comparing it with. I am sure that this contributes to the lack of strain on the joints. It does not lead to a noticeably heavier paddle.  Tony did note a weight increase over his Cyprus paddle but it does not have spigot that allows extension by 10cm. Phil thought the Voyager was lighter than his Explorer with carbon shaft! (Maybe this was due to the lower swing weight due to the high aspect blade). The shaft was a two piece with the excellent lever-lok which gives infinite adjustment of feather and 10cm difference to length. It has also proved remarkably reliable. (In comparison, I like many people, have discovered that the Werner joint can wear to give play (four of us use Werner Cyprus paddles and two have developed play). SystemX the UK importer have been very supportive of affected customers and have arranged for a good number of replacement splines to be fitted though this means doing without your paddle for up to six weeks as it is sent to the USA.

Being able to shorten a paddle by 10cm makes a great difference at the end of a long hard day, especially if against wind or tide. In comparison, the fixed length of the Werner Cyprus can be tiring at the end of a long day. The Voyager paddle was supplied with optional indexing on both sides which suits those that like to paddle with a low feather angle. All of us who use Werner Cyprus paddles appreciated this as they are also indexed on both sides. The Voyager index was a comfortable  shape and had a nice smooth but matt finish which gave a very good grip. The indexing was perfect with the shaft set to the shortest length. However, at full 10cm extension only half of my hands' width were on the indexing and I think the indexing should come further in. At full 10cm extension the indexing is 55cm apart, which is great for the wider grip when high angle paddling. When using a low angle paddle style, I tend to keep the hands a bit narrower, about 50cm apart. This was the distance apart that Scottish Lendal used on cranked paddles for touring compared with 55cm for their performance cranks *. A narrower grip contributes to the relaxed nature of low angle paddling as you lift the hand less high on the forward stroke. On a long paddling day this saves your shoulders a lot of lifting.

I fed this information back to Stu at VE paddles and guess what? Flexible and obliging as always Stu now offers the paddle grip indexing on not just both shafts but it now extends further in to keep your hands on the indexing even when the paddle is fully extended.

Durability. The test paddle had already been used before we took delivery. At the end of this test the blade edges were pristine, despite several rocky encounters. This is a very hard wearing paddle design which is much more resistant to damage than foam core blades from other manufacturers. The joint mechanism operated faultlessly throughout the test.

In conclusion, the VE Voyager seems to have found a real sweet spot for sea touring blade shape. It is an outstanding touring paddle. Despite a gentle catch it has a powerful, flutter free blade that allows both low and high angle paddling styles. I think the degree of flex in the fiberglass shaft compliments its intended use as a touring paddle and personally I am willing to trade a little extra weight for the shaft's greater flexibility. The ability to shorten the shaft at the end of a tiring day, on the water and without tools adds to its suitability as a long distance touring paddle. Lastly the ability to customise and tailor the design to your exact requirements by talking directly with the manufacturer and designer sure beats buying an off the shelf, mass produced product.

Specifications of the Euro paddles used in this comparative test:

VE Voyager AirCore carbon fibre blades, two piece, glass fibre, straight shaft 2.15-2.25m, 860g, blade area 642cm2, price as tested £294.00.

Compared with:

VE Explorer AirCore carbon fibre AirCore blades two piece carbon fibre straight shaft 2.00-2.10m 810g, blade area 615cm2

Werner Cyprus carbon fibre foam core blades two piece carbon fibre crank shaft 2.10 fixed 710g, blade area 615cm2

The VE Voyager AirCore (and Explorer AirCore) blades are available in carbon and the shafts are available in a wide variety of specifications: straight or cranked, in glass or carbon and indexed on either or both sides.

Further information at http://vepaddles.com and from info@vepaddles.co.uk

* Leif commented about using a slightly narrower grip for a low angle paddling style.

I originally got the tip about low angle grip spacing from Alistair Wilson of Lendal paddles in Scotland. He had competed in 1000m K1 sprint in the 1964 and 1968 Olympics. After he retired from Lendal he continued to paddle recreationally, covering large distances rather quickly. He had also changed his paddling style to a much lower angle than his former racing stroke. (The kayak is a very light 1976 K1.)



Sunday, March 27, 2016

P&H Scorpio MK2 MV in CoreLite X: first impressions.

I have recently published a long term review of the Scorpio MK2 MV in the standard roto moulded plastic CoreLite. This proved to be the kayak I spent most time in last year, I liked it very much indeed. This new version in CoreLiteX promises to be both lighter and stiffer. Though I was away seakayaking for a week at the Glenuig Inn in NW Scotland at the time,  I was fortunate enough to get my hands on one of the first boats off the production line. This was courtesy of Mathew Wilkinson of P&H, Cam Allan of Gokayaking Perth and my regular paddling buddy Phil Toman who between them got it transported for me. Thank you all.

Unwrapping the boat revealed a blemish free exterior in a very fetching turquoise, which I think is just a little more vivid than the turquoise of last year's model. I particularly liked the use of yellow for the deck lines and elastics. The boat was already all fitted up for paddle sailing and It is the first time I have every unwrapped a sea kayak and then got it set up for paddle sailing in less time than it took to cut the wrapper off!

Inside the cockpit and the hatches was not quite so smooth as normal P&H RM finish because P&H are still tweaking the RM process for the new materials, which have different flow rates as they cool.

The overall weight of the test boat fitted with a skudder was the same as a composite Quest with a keel strip. As the moulding process is refined it is likely that production kayaks will be even lighter than the test kayak,

When two people carry a normal RM kayak to the beach a "boing" sets up as the kayak flexes up and down between the bow and stern as they walk. This CoreLite X Scorpio kayak did not do this. Remarkably, it felt as stiff as a composite kayak.

This initial testing took place on waters that were flat calm with zero wind to rough with F4 wind over tide conditions. Phil agreed to give up his beloved Quest and act as photographic model. He could not help smiling as he settled into the comfortable ergonomic cockpit.

One thing I noticed with the standard CoreLite Scorpio Mk2 MV was that its maximum sprint speed was a bit down on my composite Cetus MV.  I think that as the boat flexed it absorbed some of my paddling energy that would otherwise have driven it forward. Phil is the fastest paddler in our group and he was keen to...

 ...give the CorteLite X Scorpio laldy. He agreed with me that the stiffness on the water was unparalleled in a RM boat and Phil had no difficulty reaching his normal sprint speed.

  Fortunately for us he was enjoying paddling the new boat so much that he turned and came back.

On our second island Phil and I swapped over and I put the CoreLite X Scorpio through its paces. Stiff, stiff, stiff was my overriding impression.

This boat came with skudder and the new P&H sail from Flat Earth, which appears to be identical to the FE TradeWind 80 design. (Previous P&H and FE designs in the UK have leapfrogged each other as new designs were introduced.) I will report back on this after further testing.

The large cockpit certainly makes it easy to get in and out of the Scorpio MK2 MV cockpit. Neither Phil nor I can do this in a Quest.

The clean lines and immaculate exterior of the Scorpio MK2 MV are not what you expect of an RM kayak. It looked just as good as the composite kayaks on the beach!

On a 3.5km paddle straight into a F3 wind, Phil in the CoreLite X Scorpio again shot ahead of the composite boats and...

 ...I had to persuade him to slow down for some more photos.

After a final stop on an island we agreed that Phil and Maurice would use sails on the final 3.5km crossing while the rest of the party would paddle across at a more leisurely pace.

This was Phil leaving the lee of the island. It was the last we saw of the paddle sailors till we arrived back at base. The wind increased to F4 against the spring ebb tide and it got rough. I have no photos of this as I was using my Canon 5d mk3 (which despite its price, is decidedly non waterproof). The paddlers found the conditions exhilarating but the paddle sailors had an absolute blast. Phil said he never once felt he was in a poly boat. Despite steep confused waves, he was aware of no flex in the CoreLite X Scorpio. All he could think about was that he was going faster, where he wanted to go and in more control than he could have managed paddle sailing his composite Quest.

 In short steep waves on the Solway...

 ...the stiffness of the CoreLite X really shone through and...

 ...the Scorpio gave nothing away to the composite boats.

The stiffness of the CoreLite X also benefited the Scorpio Mk2 MV's performance with a sail. Every gust drove it forward rather than wasting energy bending it. The CoreLite X and composite boats were paddle sailing neck and neck.

I have the demo boat for at least 3 months and will report back further at the end of the test period. One thing that Phil and I both noticed was that the seat did not seem as comfortable as that in the Scorpio Mk2 MV in standard CoreLite which I returned to P&H in January 2016. As the kayaks are supposedly identical, some further investigation was called for. It turns out that the seat had not been fitted square in the boat. The seat was one notch forward on one side. These adjustment notches are not designed for user adjustments. They are for the manufacturer to fit the same seat to different kayaks. It proved to be a real difficult, expletive laden job to straighten it out. This boat was one of the first batch to be sent out to coaches, testers and team paddlers and I have to admit I was guilty of badgering for early delivery. It is something P&H will need to watch out for once commercial production and deliveries start.

This is my first overall impression of CoreLite X construction:
I think that given the demo CoreLite X Scorpio's outstanding stiffness and resistance to flex that one of the traditional reasons for choosing a composite boat over an RM one has now gone. Indeed if P&H can reproduce the weight/stiffness ratio of this test boat into full scale production then I believe they will have achieved a major step forward in kayak construction. The main reason for choosing a composite boat over RM (CoreLite X) may become dependent on how badly you want a glitter finish!

Friday, March 04, 2016

P&H Scorpio MK2 MV with Skudder and P&H Code Zero sail, a long term test and review.

About the test: paddling conditions and paddlers.
This test is based on testing the P&H Scorpio MK2 MV  over 4 months in the summer and autumn of 2015. The test took place in open and sheltered waters on the west coast of Scotland: the west coast of Kintyre, Gigha and Cara, the Sound of Jura, the North Channel, the Firth of Clyde and the Solway Firth. It involved open crossings of up to 14km, waters with strong tides in the Solway, Kintyre and the Sound of Jura and major headlands and tide races such as at the Mull of Galloway and Crammag Head. It has been used extensively in wind against tide conditions during a very windy July and August on the Solway . The test involved 27 day trips and a further 8 day/night camping trips to islands in the Hebrides, Firth of Clyde and the Solway Firth. The main tester was 1.73m tall, weighed 85kg and paddled the Scorpio Mk2 MV for about 700km. It was paddled by seven other people who ranged in weight from 55 to 105kg and 164 to 184cm in height. Their experience ranged from beginner to 5* level. During the test period the kayak was a free loan from P&H but in case you think this might introduce a degree of bias, the main tester has also had free loans of kayaks from several other manufacturers whose kayaks are available in the UK. During the period of the test the Scorpio Mk2 MV was paddled back to back with a Scorpio 170 and three P&H Cetus MV kayaks.

Design.
Scorpio Mk2 MV with Cetus MV behind.

The Scorpio Mk2 MV  is a development of the successful Scorpio 170, which was itself modelled on the Cetus composite range. In size The Scorpio Mk2 MV is longer and wider than the old Scorpio 170 and shorter and wider than the Cetus MV. Its volume is midway between these other kayaks. However, on the beach it looks very similar to the Cetus MV. Its wide point is just behind the cockpit. It has moderate tail rocker and quite marked bow rocker. Under hull it has a shallow V from the keel line running into softly rounded chines. The Scorpio Mk2 MV is 525cm long and 58cm wide. It is 317l in volume. Apart from being longer and wider than the original Scorpio 170, the Scorpio Mk2 MV has a lowered rear deck and cockpit rim and the lips of the hatch rims have been modified to allow easier fitting of the covers. The foredeck has been modified with inserts for attaching a sailing rig mast foot and mouldings for split paddle handles lie on either side of the compass recess. These mouldings make the foredeck very stiff and unlike many PE kayaks it requires no further reinforcement for the fitting of a mast foot. The line of the deck from the side of the cockpit to the mast foot has been modified to allow the stowed sailing rig to lie neatly. Two of the deck lines' recessed deck fittings (RDFs) have been moved to allow fitting mast side stays at right angles to the mast. The skeg/skudder control has been moved from the side of the fore deck to the top.

Construction, finish, fittings and ergonomics.

Unwrapping the Scorpio Mk2 MV was a treat. It is a beautifully proportioned sleek kayak despite its maximum breadth and the attention to detail is superb e.g. the embossed P&H logo on the alloy security bar. The boat is constructed from three layer CoreLite polyethylene. It is stiff for a PE boat and at 28.7 kg is remarkably only 0.5kg heavier than a diolen composite Cetus MV in expedition layup with a keel strip. New for 2016, the roto-molded Scorpio Mk2 will be available in CoreLite X which will be even lighter and stiffer. The bulkheads are of 7.5cm thick black foam. This has considerably reduced the volume of the rear day hatch which is 15cm shorter compared with that in the composite Cetus MV. The test boat was supplied in a stunning marbled "Ikea" blue (it matched my bags!) The moulding was particularly well finished with some matt and glossy areas. Large glossy P&H logos appear on the fore deck and the under hull. Rather disappointingly either side of the hull at the bow is finished in matt. This means that you cannot mount a suction cup for a remote camera on an extension rod. (if you don't have a sail then the flat mast base area would be a good alternative camera mounting point.) There is an alloy security bar behind the cockpit which I use for attaching a tow line using a water ski quick release shackle. 

On the foredeck there is a forward mini hatch. Its cover is very easy to remove and fit but like many other PE kayaks the mini hatch is not waterproof. The round fore hatch and oval rear hatch have rubber KayakSport covers and are indeed much easier to fit than on previous P&H PE kayaks like my Delphin. The rear day hatch is a lightweight model with a plastic centre and was very easy to open and close when on the water.  As mentioned above, the rear day hatch is considerably smaller than the equivalent hatch in the Cetus MV due to the  fact that the two foam bulkheads are a total of 15cm thick. If volume is important to you on expedition it might be worth considering the Scorpio Mk2 HV which will be released in mid 2016. The hatch recesses have moulded drainage channels. In normal use and during rolling sessions the three main hatches remained bone dry. The boat had the usual excellent P&H deck elastic and deck line arrangement. I particularly like the fact that the rear deck lines come right up to the rear of the cockpit. This allows the paddle to be secured during a paddle float re-entry. 

The Scorpio Mk2 MV comes either the MK2 P&H skeg or the Skudder. I have found the MK2 skeg to work faultlessly on other kayaks, as long sand is washed out of the skeg box and the tension in the downhaul elastic is regularly checked. 

The skeg (and skudder) adjustment slider has been moved from the left side of the onto the top of the deck to the left of the midline. This is a great move as it stops your paddle hand catching and releasing it (especially if you are wearing pogies). Even walking past a boat with the slider mechanism in the original position can brush against and release the skeg which is not good if you are about to push it back into the water. The new position is out of the way and easy to get to. I use a large deck bag for a DSLR camera. I needed to fit it slightly forward to clear the skeg adjuster but I could still reach it easily. The only disadvantage of the new position is that it is a sand trap if you are launching in dumping surf on a sand beach. So keep an eye on this and wash any sand out without delay. 

The cockpit is 80cm long which means I found it easy to get in and out, even with bad knees. The cockpit rim has been modified and I found a Reed spray dick fitted securely and had no tendency to come off in dumping surf. The deck round the cockpit is also very stiff and flexes very little when bracing your legs in the comfortable, adjustable thigh braces. Tools are required to adjust the thigh braces but it is a straightforward job. The seat is the P&H Connect seat with padded cover and adjustable backrest and hip pads. It is fitted nice and low in the cockpit. I found it easy to get a very comfortable fit in the Scorpio Mk2 MV as did most of the testers. The largest tester did find his feet (UK size 12, 89cm inside leg) cramped but I had no trouble with my size 10 Lomo boots with 74cm inside leg. The 55kg paddler enjoyed the Scorpio Mk2 MV but is considering buying the Scorpio Mk2 LV which is a more appropriate size.

The test boat was fitted with the optional Skudder, a combined rudder and skeg mounted in the usual skeg position. It has a decent sized blade to aid control. It is also considerably stiffer than the standard P&H skeg. 

All the control cables are contained within the boat and the rear control levers over the rudder are covered by a flush plastic cover on the rear deck. The rear hatch looses a little room compared with a simple skeg box but long thin items can still go up either side. The Skudder is incredibly well designed and engineered especially given the price of the boat it is fitted to. It is controlled by Smart Track foot pedals, which self adjust as the footrests are slid back and forwards.  It did not need any adjustment during the test. In use it acts as a skeg if you deploy it up to just over half way. If you put it fully down the pedals can now turn it and it acts like a rudder. It does not self centre as you put it away so you need to centre it with your feet first. Until you get used to this, do not leave it till the last minute before landing. 

The only downside is that the pivot pin for the Skudder is in an exposed position at the front of the skeg box. The hinge is unaffected by shingle, mud, or fine sand but some coarse shell sands (as found on the Outer Solway) can jam it and If the boat has been sitting on such sand you should make sure it is clear after launching but before getting into the boat. Some rental companies using Venture kayaks with the Skudder have experienced problems with the vertical rod which turns the rudder. At the end of the test I dismantled the Skudder but found no problems. Either the design/construction has changed or rental kayaks get much more wear than the 700km I covered and the 300km others covered in this Scorpio kayak.

The test kayak came with the P&H Code Zero sailing rig. The mast, stays and mast foot are supplied by Kari-Tek. The sail is made by Flat Earth in Australia and uses a very similar cut to their own Trade Wind sail. The P&H sail was tested in OP #46. Since then, P&H have changed to a four stay design from Kari-Tek's three stay system. Three mini karabiners are supplied for the side and back stays so that once you have their length adjusted, you can quickly remove and fit the sail without need for further adjustment. As mentioned above, two of the RDF's have been moved so that they are at right angles to the mast foot, which is the ideal position for attaching the two side stays. 

The two cleats for the uphaul/forestay and the sheet have fairleads. I prefer cleats without fairleads so that the lines can be released instantly (without fear of re-jamming) in the event of a sudden squall or capsize. The sail has a shorter luff than previous Flat Earth sails and on the standard mast you can see forward under it so no window is required in the sail.

Overall performance.
I felt comfortable in the Scorpio Mk2 MV straight away. I have been sea kayaking as often as I can for 13 years and when I first saw how beamy the Scorpio Mk2 MV was, I wondered whether I would find it boring to paddle. I also thought if it would feel more uncontrollable in really rough conditions than a boat like my Nordkapp LV, which is narrow with highly rocked, low volume ends. Surprisingly the Scorpio Mk2 MV is remarkably unflappable in the rough stuff. 

Photo from the Scorpio MK2 MV off Garroch Head.

I was taking photographs with my DSLR in F4/5 wind over a spring tide in the Garroch Head tide race in conditions I would not have dared to take the camera out in the Nordkapp LV.

The Scorpio Mk2 MV off Garroch Head Photo by Ian Johnston

I think that some advanced paddlers may be surprised by the Scorpio Mk2 MV's abilities. It would make a great, robust kayak for guiding or coaching. Not once during my time with the Scorpio Mk2 MV did I feel that I would rather be in one of my other kayaks. I now wonder whether a composite kayak with a similar maximum beam but the overall slim lines of the Scorpio Mk2 MV shape might be a success? Whatever, I think P&H have hit a sweet spot with this design.

Stability and rolling
The Scorpio Mk2 MV is remarkably stable for a touring sea kayak due both to its width and rear set wide point. It is an ideal platform for coaching, photography, bird watching or fishing. It is incredibly stable when on edge and is great fun when weaving through rock gardens. It rolls very smoothly but a little more slowly than the narrower Cetus MV. The lowered rear cockpit edge makes back deck rolling much more comfortable than the old Scorpio, without having to raise your backside off the seat.

Speed, manoeuvrability and tracking
The Scorpio Mk2 MV is easily able to maintain a normal all day touring pace of 6-7.5km/hour whether loaded or unloaded. Despite paddling regularly with three other paddlers in Cetus MVs at no time did I feel disadvantaged, even after a day where we covered 47km. The glide and tracking are both improved over the old Scorpio 170. Despite being more directional when paddling a course than its elder sibling it was noticeably faster to turn on edge. I found my maximum burst speed was about 10% down compared with the Cetus MV in the same conditions. When paddle sailing in waves in a good F4/5 day my top speed in the Scorpio Mk2 MV was 18km/hour on the best wave and 20.5km/hr in the Cetus MV on its best wave. A little skeg helps with tracking as the wind picks up but the adjustment range on the slider (when in skeg mode) is shorter than on a conventional skeg and so it is a bit more tricky to get just the right amount of skeg.

The Skudder
I was not expecting a great deal from the Skudder in rudder mode. I was wrong and as the months on test went by, I found I was using the rudder mode more and more, even without the sail! It is not a panacea for manoeuvring a kayak but unlike some systems I have tried, it does have a big enough blade to be effective, even when paddling at 45 degrees to the wind (when some rudder systems are better lifted as they cause lee cocking if you cannot paddle fast enough). The 5* paddler felt there was no need for the rudder as the Scorpio Mk2 MV was so manoeuvrable when edged. Initially I agreed but then I discovered that the Skudder works remarkably well for more advanced paddlers when used with edging and steering strokes. Then I noticed that two of the early intermediate paddlers had started to automatically edge the kayak when they were using the Skudder! The beginners loved it.


Behaviour in wind and waves 
Due to its sleek low profile and rocker line the Scorpio Mk2 MV is very well behaved in wind. It gently weathercocks but this is easily controlled by the Skudder in either skeg or rudder mode. The low profile means that in choppy conditions when paddling to windward the Scorpio Mk2 MV is quite a wet kayak. However, it is dry when paddling downwind and the tail rocker is very good at picking up following seas. Once on a wave the bow rocker keeps the bow clear of the water if you get the kayak planing. If you stuff it down into the trough then the bow rocker helps prevent purling (nose diving). Like other kayaks with a rear set wide point the Scorpio Mk2 MV is surprisingly manoeuvrable if you stay high on the wave. This can lead to a sudden broach but more advanced paddlers will be able to use this manoeuvrability to correct early and run straight.

Paddling when loaded
The Scorpio Mk2 MV is a bit more directional when loaded with camping gear and if anything the Skudder in rudder mode is even more useful on such a trip. Although the wide point of the kayak is aft of the cockpit, the rear deck is low so the rear hatches do not have so much volume as some kayaks of similar length and overall volume. As a result it is easy to put too much weight in the front. It is important to distribute the weight about 60% in the rear and 40% at the front otherwise the kayak will develop excessive weather cocking. If you get the balance right the loaded Scorpio Mk2 MV is delightfully neutral to paddle whatever the wind or wave conditions.

Paddle sailing.
The Scorpio Mk2 MV is a great boat for paddle sailing, especially if you are new to using a sail or don't like drilling holes in a new boat. (You still need to decide where to mount the two cleats but as they screw into the cockpit area you won't be worried about creating a leak.) Neither do you need to worry about where to mount the mast foot as P&H have already found the best position. Even beginners to kayaking were happy to deploy the sail in sheltered conditions. Newcomers to paddle sailing need to realise that you don't just sit there letting the sail do the work. You will soon get cold.

It is much more fun to paddle hard and use the sail for extra speed, especially downwind when you can catch faster waves than when using paddle power alone. More advanced paddle sailors will find the stability of the Scorpio Mk2 MV very reassuring as they push their paddle sailing into stronger wind and wave conditions. When travelling fast downwind, you need to be light footed with the Skudder. It is easy to steer too far one way then overcorrect the other. When paddle sailing downwind on an 11km crossing in F4 conditions with two paddle sailors in Cetus MVs, I found I was actually faster using the Skudder in skeg mode than rudder mode. In F4 winds the Skudder is big and effective enough to tack the Scorpio Mk2 MV through the wind. Most other over stern ruddered kayaks I have used for paddle sailing in such winds are easier to tack if you lift the rudder first.

Conclusions
As the sun went down on my last night camping from the Scorpio Mk2 MV I reflected on what a great kayak I had enjoyed.

The Scorpio Mk2 MV is such a versatile kayak that if it had been available when I started sea kayaking 13 years ago I would probably still have it. Over the 4 months of the test (during one of the windiest summer and autumns in 20 years) I really grew to appreciate its versatility and forgiving nature. The various features of the Scorpio Mk2 MV with Skudder and sail are so complimentary that the whole is truly greater than the sum of its parts. Not only is this an ideal kayak for those starting off in sea kayaking but it will grow with them and support the development of advanced skills. It would also make a great kayak for coaching. Lastly, the Scorpio Mk2 MV with Skudder and sail must be the easiest way into paddle sailing. The only thing I can find wrong with it is that P&H wanted it back!

Disclaimer
Three years ago I spent an hour and a half drifting in my kayak on the Solway. I was on the phone to Graham Mackereth of P&H. We were discussing what sort of features would make a new, all round sea kayak suitable for all abilities and be ideal for those interested in paddle sailing. I am delighted to discover that many of those ideas have now made it into production. I am glad that a manufacturer was prepared to listen to customer feedback and act on it. This may have led to some bias in this review so I suggest anyone thinking of purchasing such a kayak goes and test paddles the Scorpio Mk2 MV and makes their own mind up.

Specifications of Scorpio Mk2 range

Scorpio MK2 LV
Length: 508cm
Width: 53cm
Volume: 271l
Weight: 27.5 kgs (CoreLite) 25kg (CoreLite X)
Paddler weight range: 50-110kg

Scorpio MK2 MV  (as tested)
Length: 525cm
Width: 58cm
Volume: 317l
Weight: 29.5kgs (CoreLite) 26.5kgs (CoreLite X)
Paddler weight range: : 65-125kg

Price:   with skeg RRP: CoreLite £1,299 CoreLite X £1484
            with Skudder RRP: CoreLite £1,399 CoreLiteX  £1584

Scorpio Mk2 HV will be available mid 2016.